Weatherproofed Workwear that combines all the functionality, comfort and temperature regulation you need on cold and wet workdays.
It’s said that rain can have a negative impact on your health and wellbeing and, if you haven’t got particularly effective rainwear, your mid-and base-layer clothes could get damp and uncomfortable which will affect your body’s own in-built climate control system.
Apart from wet clothes getting heavy, it’s also possible that you could get a rash from simple irritation through friction and then, moving around becomes much more tiring.
Your body can also lose heat – probably faster than you can generate it to dry your clothes out. That’s fine if you’ve been drenched by a sun shower when it’s warm, but if it’s cooler or even cold on site, your body temperature is going to drop.
Not only can stewing in your wet clothes chafe and irritate your skin, if you’re wearing damp or wet clothes for too long, bacteria, and fungus from the air can multiply in the wet clothes environment and then run rampant on your skin causing rashes and irritation.
Stay dry in the rain
Staying dry and comfortable on site is all about choosing the right type of rainwear for the job. Your choice depends on a variety of factors, from the type of rainfall to how intensely you’re working and how many hours you spend outside – and whether or not the clothing you wear can to combine to create its own climate control system for your comfort and wellbeing.
Here’s what to think about when when dressing for wet weather work – not only jackets but trousers too:-
- For 100% waterproofness for a full day’s high-intensity work– choose a breathable waterproof garment with taped seams for maximum protection and breathability.
- For 100% waterproofness in low-intensity work in pouring rain – choose a PU garment with welded seams.
- For a basic protection against water – choose a garment that is water-repellent. The garment will keep you dry if it’s drizzling but still offers breathability.
- Don’t forget that what you wear underneath your outer layer really matters – think about Climate Control for your body.
- Also sustainability in the clothing you choose is a major factor nowadays. Look for clothes that have a reputation for longevity and are made from environmentally friendly fabrics to reduce waste and pollution.
For high-intensity work, make sure your base-layer clothes are made of breathable fibres and fabrics that keep you dry and ventilated by wicking moisture away from your body. For optimum comfort and performance, you’ll then need a mid-layer fleece or gilet made from knitted or quilted materials to provide comfortable insulation by creating a pocket of air around your body. Then top it off with a third and final outer layer jacket to protect you from the elements like rain, hail, snow, wind, or cold.
What’s most important is that layering your working clothes properly will ensure that your energy and performance levels are as weatherproofed as you are.
There’s a big difference between ‘waterproof’ and ‘water-repellent’.
When it comes to ‘water protected’ workwear it’s important to know what’s behind each of the terms. They are different.
Peter Dumigan, managing director of the Hultafors Group UK says, “A waterproof garment – like our GORE -TEX® jackets – is the most effective 100% protection in rainy weather. This kind of waterproof fabric consists of an outer layer called the “face fabric”, usually made of polyester with a laminated membrane or a coating that prevents water penetration”.
It’s achieved by sealing the internal fabrics completely from external conditions. All seams and cut lines are taped or sealed to stop the water coming through the stitched areas of the fabric.
Water-repellent garments only offer basic protection against the effects of water, but at the same time can provide great breathability to ventilate your body when you’re active.
Water-repellent protection is achieved by using a hydrophobic fabric, which means that the water is repelled on contact. The fabric is treated with a DWR (Durable Water Repellent) finish that causes the water to form drops on the surface of the fabric that run off or can be brushed off easily.
Choosing the right kind of weatherproofed workwear.
“How wet are you likely to get on site?” asks Peter. “Your answer will help you choose the right type of rainwear to wear. What does the weather forecast say? Is there a risk of heavy rain, showers or drizzle? Will your work be low-intensity or more active?”
“Finally, how long will you be exposed to the wet weather – minutes or hours? Hence, longer shifts will put more demands on your working clothes and the waterproof technology used in the garments. That’s why you need to consider whether you should be wearing waterproof or water-repellent clothing”.
“So, for longer exposure or, if you need 100% protection on site in the rain, look for our GORE-TEX® jackets. These highly technical garments are extremely durable with a membrane has over 1.4 billion pores per square cm. They’re waterproof to keep you dry, windproof to keep you warm, and breathable to keep you comfortable all day long”.
For quick and reliable protection during when its raining or if your work is less active, choose our PU garments which, along with our other rainwear clothing have EN 343 certification for Protection against Foul Weather. This accreditation validates the garment’s performance in the rain through independent testing.
Also, don’t forget about ventilation! Your clothes’ breathability is as crucial for your comfort as the outer-layer protection against water, especially when you’re working really hard. Clothes with good climate control that transports sweat away from the skin.
So, make it a habit of checking the breathability features of the garments you buy. Breathability comes in two ways. Either the breathability of the fabric itself, such as our 37.5® sports fabric, or built-in ventilation functionality such as zippers or meshed fabric areas at the sides and back of the garments.
Finally, whatever the rain may do to dampen your spirits, as far as your work clothes are concerned, by choosing the right workwear, you can work effectively and comfortably all day long.
Peter Dumigan is managing director of the Hultafors Group UK, which owns Snickers Workwear, Hultafors Tools, EMMA, Solid Gear and Toe Guard safety footwear as well as Hellberg Safety PPE and CLC Toolcarriers.
To get more information on the Hultafors Group UK range of workwear, safety footwear protective wear and PPE products email [email protected] or call the Hultafors Group Helpline on 01484 854788.